Grip Tile Bond — Floor Tile Adhesive: how to use

SHARP V BONDHOW TO USE
LOADING 3D
GRIP TILE BONDFLOOR TILE ADHESIVE
STEP 01 / 07

Initial mixing

Pour adhesive powder into water as per the required ratio.

  1. Initial mixing. Pour adhesive powder into water as per the required ratio.
  2. Mixing adhesive. Mix the paste using a mechanical mixer for a minimum of 5 minutes.
  3. Rest. Wait 5 minutes, then mix again for 2 minutes.
  4. Apply on cleaned surface. Apply adhesive on the surface using a trowel at 3–6 mm thickness, then comb it with a notch trowel.
  5. Tile fixing. Fix the tiles onto the applied adhesive.
  6. Leave to dry. Do not disturb the tiling for a minimum of 24 hours.
  7. Cleaning tiles. Clean the tile surface.